The Oil Coalescing Separator (OCS) is designed to remove free non-emulsified oils, diesel, gasoline, and fuels from a waste stream, resulting in an effluent quality of 10 mg/l or less of contaminants 20 microns and larger. The OCS operation is based on closely spaced oleophilic (oil-attracting) media that promote the impact and formation of larger oil particles. As the oil droplets increase in size their rise rate to the water surface also increases.
The influent water enters the separator and flows through a tightly stacked bundle of media. The media expands the surface area of the separator giving the oil more room on which to combine (coalesce). As the oil droplets accumulate on the media and coalesce they develop into larger droplets that flow up the surface of the media, detach and rise to the water surface. Surface oil is decanted by gravity into a segregated oil reservoir where it can be removed from the tank. Heavier solids (solids having a specific gravity higher than that of water) will slide down the surface of the media into the sludge chamber at the bottom of the tank for periodic removal. Virtually oil-free water travels under an oil reservoir baffle, over an adjustable weir, and into a clean water effluent chamber. The water is gravity discharged from this chamber.

Industrial & Environmental Services
Oil Coalescing Separators (OCS)
An oil coalescing separator removes free and dispersed oil from water by encouraging tiny droplets to merge into larger ones that rise and can be skimmed. It protects downstream treatment and helps meet discharge limits.
We help industrial customers choose and size oil water separation equipment for their application.
What to know
- Oil removalSeparates free oil from process water.
- Coalescing mediaHelps small droplets combine and rise.
- Low maintenanceSimple designs with few moving parts.
- Discharge complianceSupports oil and grease limits.
How it works
- 1Share your processTell us about your wastewater, flow, contaminants and discharge or reuse goals.
- 2We recommend a fitWe propose equipment, chemistry or service options sized for your plant.
- 3Install and start upWe coordinate delivery, installation support and commissioning.
- 4Support over timeInspections, parts and service help keep the system performing.
Why choose Industrial & Environmental Services
We help match equipment and chemistry to your wastewater, flow rates and discharge limits.
Supply, installation support, inspection and parts from one team.
Solutions aimed at lowering treatment cost and keeping you within permit requirements.
Ready to talk about Oil Coalescing Separators (OCS)?
Call (256) 452-4988 or send us a message.
